최근본상품 0


    추천상품 0


      장바구니 0


        위시리스트 0


          Project 4X EVO 신제품 출시 임박!! 선주문고객께는 사은품이..
          분류:써펀트뉴스   페이스북 트위터 구글+ 
          작성자 : 관리자 | 조회: 1,382 | 날짜: 2018-03-27 14:12:17

          ★ 선주문 고객께는 EG7035B 배터리 서비스 증정~ 무료~♥

          << 선주문하러가기(클릭) >>

          > Project 4X EVO 1/10 EP (#400031)


          Product Type: 
          Electric Cars > 1/10 190mm

          Project 4X EVO 1/10 EP The Project 4X EVO touring car has a unique and proven design, in which the suspensions works in a very effective different way, with an extremely low center of gravity, very easy to work on and very durable. Easy to drive and lightning fast!

          Related products

          > Specifications

          Car:Project 4X EVO #400031
          Class:1/10th scale 190mm Electric
          Purpose:190mm Competition touring car
          Chassis:2mm carbon, CNC machined
          Suspension:Seperated heave and roll system
          Rear axle:Rear gear- differential with composite gears
          Front axle:Front spool
          Drive system:4wd through 2 kevlar reinforced timing belts
          Shock absorbers:2 heave dampers and 2 roll dampers
          Wheel base:254mm +/- 4mm
          Track-width front:190mm + /- 6mm
          Track-width rear:190mm + /- 6mm
          Weight ( chassis):550 grams
          Adjustability:Camber, Caster, Down-stops, Up-stops, Toe-in, Track width & Roll centres
          Instructions:Motor, battery, speed Controller, tires, body, radio equipment.
          Not included:

          > Description

          2016-2017 IFMAR World Championship 3rd place 
          2016 EFRA EC  A-main  finalist, 2017 Multiple ETS A-main finalist

          Battery mounts
          State of the art battery mounts made in aluminium and carbon fibre and allow positioning the battery more to the front or backing and securing it well in place. Shorty lipos can be placed centered, in front or rearward position.

          Floating servo mount
          The servo mount is a combination of a carbon brace and aluminium posts. The carbon brace is bolted to the central brace and does not touch the chassis to prevent any flex influence. 

          Steering system
          The ball raced aluminium steering system consists of an inversed lever system to better control the Ackermann setting. The angle difference between the inside and outside wheel is a lot more linear than in conventional designs. 

          In the front the 4X EVO features durable spring steel double joint cardan shafts, combined with the blade type spool. 
          In the rear lightweight coated aluminium cvd style dog bones are used with durable spring steel wheel axles. 
          Both front and rear wheel hexes are a lightweight aluminium design 

          Steering blocks / uprights
          In the front and rear the same steering blocks/uprights are in use. The pivot ball system allows for easy and quick set-up changes and works very smoothly. In the front there are 3 Ackermann positions and shimming below the steering rod can be used for fine tuning of the bump steer characteristics. In the rear the system allows to set Reactive Rear Steering. This RRS system allows for a change of toe-in while the suspension compresses and thus increases corner speed. 

          Wishbones / pull rods / rockers
          The lower wishbones are the same front and rear and the same goes for the upper arms. 
          The lower arm mounts of 2 short pivot pins and the mounts have a lot of space to play with wheelbase by using clips. The lower arms also feature 2 down stop screws front and rear.
          The upper wishbones allow quick caster changes with clips and run on an easily removable long pivot pin. 

          Rocker and pull rods system
          The pull rods connect to the upper arms and operate the ball raced aluminium rocker system which activates the dampening systems for heave and roll action. All track rods are made in coated lightweight and tough 7075 T6 aluminium. The pull rods are molded version and 5 fixed lengths are included: 19, 19.5, 20, 20,5 and 21, 20 is default. 

          Aluminium upper hinge pin holders and alum stiffeners
          The assembly is split in 2 sections to allow for easy maintenance and change of settings. The inner top brace connects both sides and creates a very strong structure preventing tweak. The top brace is connected to the lower brackets with alu stiffeners. These stiffeners can be easily removed in case more flex is needed. The assembly rest on roll centre spacers. To add additional shims for changed camber gain and roll enter is a simple and quick setting. 

          Bumpers and body mounts
          In the front a strong bumper-set using a large size but light foam bumper which is sandwiched between the lower composite bumper and upper graphite holder. The flexible moulded body posts with swivel-system go all through. Optional body height systems are available. 

          In the rear the lower bumper will prevent damage to the rear of the 4X EVO and the moulded body posts with swivel system mount on a thick and stiff carbon plate, which is part of the strong rear end assembly.

          The kit contains a Serpent logo decal sheet and a Project 4X logo-sheet.

          High quality, high precision lubricated long-life bearings made of hardened steel throughout. 

          High quality steel fasteners for durability. Minimised number of different screws for ease of assembly and maintenance 

          The full color manual is supplied on a nice carbon look USB stick and the latest version and updates can be downloaded from the Serpent website. The manual features an extensive assembly explanation as well as all exploded views. The exploded views are active, so when clicking a part number it will take you to the right part number in our website. 

          As set-up sheets a blank, a default and an editable pdf file is supplied and updates and set-ups from team drivers are online in our website, too
          Serpent is preparing some videos which show the key features as well as the key assembly steps and how to set up and maintain the 4X EVO. 

          Project 4X EVO car design
          The Project 4X EVO is a unique and innovative racing car. It’s very different design requires the driver to take time to learn the dynamics of the car and fully understand its features. Once understood, it is not more complicated than any other racing car.

          Top deck
          The topdeck consist of 2  vertical mounted carbon braces mounted to the front and rear brackets with 2 additonal supports on the centreline.  The additional supports can be used or not, as to influence flex / torsion.  The topdeck is an important feature to limit the tweak of the car in crashes. 

          Carbon fibre chassis in 2.0mm thickness. Countersunk holes and designed to have equal flex left to right.   The screws to set ride height are adjusted from the bottom of the chassis with just one screw in front and one in the rear with a simple and effective mechanism to adjust the ride height. 

          Main new 4X EVO items
          Vertical top-deck  for less tweak

          Chassis plate carbon with better flex characteristic  

          Bigger heave dampers with more oil and  larger shock-springs

          Motor mount with better flex control

          Updated bumpers for access and performance

          Linear  pull rods system for improved steering

          Lower  mounting point for RRS links

          Main front and rear brackets in a stronger construction

          Fixed length molded pull rods for ease of use and perfection

          Improved centre shaft holders 

          Bladeless front spool

          Serpent designer David Ehrbar and Serpent are very proud to be able to release this new innovative and high performance 4X EVO car to the market.

          As the car is so different, Serpent will spend even more time to prepare information on assembly, set-up and maintenance of the Project 4X EVO car, in text, images and video, to help you to learn and understand the concept and unleash its full potential faster. Although at first the Project 4X EVO car may look a bit complicated, after some explaining, you will soon understand it’s actually quite simple and really easy to work with. But the main advantage is that it is very easy to drive and at the same time lightning fast. Innovation Performs. The Serpent Project 4X EVO is here!

          Overview of the main specs
          -   Separate roll and heave motion in the car to make set-up easier and more precise
          -   Small and light roll dampers front and rear that need only small amounts of oil, with through rod piston systems so no membrane is needed
          -   Larger heave damper with more oil and bigger springs 
          -   Dampers include machined pistons for best possible consistency
          -   Good selection of heave and roll springs
          -   Anti-roll bar function integrated in roll damper/springs
          -   Easy and fast to change / replace the whole damper units
          -   Front and rear end are almost identical, so less spare parts needed
          -   Pivot ball suspension with small balls for simplicity and free movement
          -   Easy diff and spool removal
          -   Extremely low center of gravity
          -   Reversed steering system for better Ackermann geometry
          -   Motor holder with right flex
          -   Re-Active rear steering RRS system is standard
          -   Ball raced mid-shaft holders allow easy maintenance and changing of spur gears
          -   Molded pull rod activated system with rockers to activate the dampers
          -   Same heave damper front and rear which is mounted below the diff/spool just above the chassis for lowest possible center of gravity
          -   Durable and smooth gear differential 
          -   Battery mounting system allows reposition the battery more front or rear
          -   In case of shorty Lipo's are used, the Lip can be positioned in 3 ways 
          -   One screw ride-height adjustment from chassis side 
          -   Lightweight front aluminium spool with hardened steel outdrives, bladeless 
          -   Carbon fibre chassis in 2mm as standard 
          -   DJC system in the front made out of spring-steel prevent wheel chatter and rear regular cvd’s made out of 7075 T6 aluminium save weight
          -   One short and one longer Kevlar reinforced drive belt and super true running pulleys, midshaft pulleys made out of hard anodized aluminium for maximum durability
          -   Concept and design by Serpent Designer David Ehrbar from Germany

          High performance 4wd touring car with an extremely low centre of gravity and a unique suspension system which separates roll and heave set-up. This combined with a well proven transmission system and overall Serpent quality and engineering solutions.

          In the 4X EVO car the heave and roll of the car operate and are set independently. The front and rear end of the car are almost identical in design and share many of the same parts front and rear, so you need less different spares.

          Heave damper
          There is one heave damper in the front and one in the rear and they work in the same way. The heave damper is located just above the chassis to lower the centre of gravity. Molded pull rods which are connected to the upper arms link to the rocker system. The rocker system is connected through a swivel unit to the heave damper and roll damper unit. The bigger heave damper now has more oil inside and works with foam for compensation. The shock springs are now larger in diameter and more effective. Different oils and springs can be used for setup work, influencing mainly bump and on-throttle/off-throttle transitions. It is easy to access from the bottom of the chassis.
          The ride height is set with a simple one screw setting in the chassis, both front and rear. 

          Roll damper
          The roll damper unit consist of an oil body for dampening with a through shaft and has a small spring on each side. This unit controls the roll of the chassis; it works as an anti-roll bar.
          Different oils and springs can be used for setup work. The whole unit comes out after releasing just 2 screws. One can have complete roll damper assemblies ready to change settings in seconds. 

          Motor mount
          Extremely low 7075 T6 aluminium motor mount which doubles up as connector for the midshaft holders, connection for the RRS system, holder for the alu stiffener and connector to the central brace, all-in one.

          Gear differential
          The nicely shaped gear differential features molded internal gears which makes it super smooth. The compact and light unit holds a good amount of oil to deliver consistent performance throughout the run. It is fast and easy to take out and re-mount the differential.

          Front spool
          The coated aluminium front spool with lightened spring steel outdrives is a bladeless type which ensures superb handling and durability throughout the race.  It is fast and easy to take out and re-mount the spool

          The transmission system consists of large diff and spool pullies and efficient low friction belts. The light centre shaft pullies are durable coated aluminium units. 
          Mid shaft section
          The ball raced durable hollow spring steel mid shaft holds the 2 pullies as well as the spur in place. The assembly is super easy to build and maintain. The aluminium midshaft holders are same left and right. 

          The range of optionals for the 4X EVO car is small as Serpent made the car top level racing ready. 
          Key optionals are the different springs used in the heave and roll damper, the lightweight/flex chassis plate, stiffeners and body height adjusters.

          Needed to complete the car:
          Body, body paint, radio equipment, speedo, motor, tyres/wheels, battery, tools, thread lock. 

          Serpent Performance Team

          b*m (비회원) 2019-08-22 19:29 답글쓰기 답글수정 답글삭제
          p*m (비회원) 2019-08-21 15:18 답글쓰기 답글수정 답글삭제
          s*e (비회원) 2019-08-21 06:30 답글쓰기 답글수정 답글삭제
          r*b (비회원) 2019-08-17 14:11 답글쓰기 답글수정 답글삭제
          e*n (비회원) 2019-08-13 07:12 답글쓰기 답글수정 답글삭제
          d*i (비회원) 2019-08-12 19:14 답글쓰기 답글수정 답글삭제
          p*m (비회원) 2019-08-09 14:35 답글쓰기 답글수정 답글삭제
          s*w (비회원) 2019-08-07 08:41 답글쓰기 답글수정 답글삭제
          l*e (비회원) 2019-08-06 14:14 답글쓰기 답글수정 답글삭제
          b*z (비회원) 2019-08-06 02:45 답글쓰기 답글수정 답글삭제

          비밀번호 확인

          댓글 등록시에 입력했던 비밀번호를 입력해 주세요.

          비밀번호 확인

          게시글 등록시에 입력했던 비밀번호를 입력해 주세요.
          알씨뉴스 RC NEWS

          114 [써펀트뉴스] 2018 KMRCA 1/8 IC TRACK 한국선수권대회 1위 홍기용선수 축하합니다. (11) 관리자2018.10.111163
          >> [써펀트뉴스] Project 4X EVO 신제품 출시 임박!! 선주문고객께는 사은품이.. (13) 관리자2018.03.271383
          112 [써펀트뉴스] Designer interview with Ehrbar on 4X-EVO (20/03/2018) (14) 관리자2018.03.211403
          111 [써펀트뉴스] Scoop: project 4X EVO coming soon ! (14/03/2018) (13) 관리자2018.03.211058
          110 [써펀트뉴스] USA: Merlin Depta at Winternats 2018 with 988 (21/02/2018) 관리자2018.02.26107
          109 [대회소식] 써펀트코리아 윈터챌린지 전한영 선수 축하합니다!! (2018.02.11) 관리자2018.02.13120
          108 [써펀트뉴스] Team: Cody King from USA joins Team Serpent Offroad (22/01/2018) 관리자2018.01.24111
          107 [써펀트뉴스] Cobra SRX8 EVO and SRX8-E: Best of both Worlds ! (16/01/2018) 관리자2018.01.1798
          106 [써펀트뉴스] USA: Roniel joins Team Serpent America (10/01/2018) 관리자2018.01.1667
          105 [써펀트뉴스] Cobra GT 3.1 promopages ready (10/01/2018) 관리자2018.01.1651
          104 [써펀트뉴스] Team Serpent America: Cabal joins 1/10 GP team (10/01/2018) 관리자2018.01.1610
          103 [써펀트뉴스] Team Serpent (12/12/2017) 관리자2017.12.21118
          102 [써펀트뉴스] Team China: Rocket Zhang joins SPT for 1/10 TC (23/11/2017) 관리자2017.11.29191
          101 [써펀트뉴스] Serpent Asia Cup 2017, Hong Kong, 1/8 EP class added (27/10/2017) (2) 관리자2017.10.31263
          100 [써펀트뉴스] Michael Salven confirmed for the SAC 2017 in Hong Kong (26/10/2017) (2) 관리자2017.10.31187
          99 [써펀트뉴스] [ SPT News ] Greiner confirmed for Serpent Asia Cup 2017 (10/10/2017) 관리자2017.10.16113
          98 [써펀트뉴스] Serpent Viper 988 promopage ready (05/10/2017) 관리자2017.10.1680
          97 [써펀트뉴스] SAC 2017: Nicholas Lee confirmed ! (03/10/2017) 관리자2017.10.1688
          96 [써펀트뉴스] SPT t-shirts and cap delayed (27/09/2017) 관리자2017.09.2875
          95 [써펀트뉴스] Serpent Asia Cup 2017, Hong Kong (27/09/2017) 관리자2017.09.2868

          비밀번호 확인

          게시글 등록시에 입력했던 비밀번호를 입력해 주세요.

          비밀번호 확인

          댓글/답글 등록시에 입력했던 비밀번호를 입력해 주세요.
          회사명 : E&J TRADING | 사업자등록번호 : 217-03-92318 [사업자정보확인] | 주소 : 서울특별시 서초구 언남14길 5 (양재동, 삼성빌딩) 201호
          통신판매업 신고 : 제2017-서울서초-0239호 | 연락처 : 02-577-7302 | FAX : 02-575-7304 | 개인정보관리 책임자 : 이창학 | 대표자 : 이창호
          contact : rctop@naver.com for more information
          호스팅제공: (주)가비아씨엔에스
          회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
          현재 비밀번호
          신규 비밀번호
          신규 비밀번호 확인
          6~20자, 영문 대소문자 또는 숫자 특수문자 중 2가지 이상 조합